Call us
Email us
Request a meeting
Live chat
The fastest most energy efficient HEPA–filtered hand dryer1
• 10–12 second dry time
• Hygienic performance with HEPA filter
• Up to 99% less expensive than single–use paper towels
• 5-year guarantee
• Max and Eco mode available
• Available in two voltage options
-
Get in touch
Proven hygienic by independent testing
All Dyson Airblade™ hand dryers undergo rigorous testing by Dyson. The impact of drying hands has been tested in universities and published in international journals.
Key features
Low energy. Low running costs.
The Dyson Airblade 9kJ hand dryer uses 9.1 kilojoules of energy per dry, meaning it costs just $19 a year2 to run in Eco mode. With a fleece-lined glass fibre HEPA filter to capture 99.95% of particles3, including bacteria and viruses, from the washroom air. Our quietest4 Dyson Airblade™ hand dryer features silencers made from open-cell foam and perforated discs, reducing noise as airflow passes through the motor.
Key technology
-
Curved Blade™ design
Two 0.45mm curved apertures create 624 km/h5 blades of air that follow the contours of your hands, removing water in less time.
Hygienically dries hands with clean air
The HEPA filter captures 99.95% of bacteria-sized particles3 from the air and is NSF-approved.
Our quietest4 Dyson Airblade™ hand dryer yet
Acoustically engineered to minimise washroom noise.
Tough and robust design
The stainless steel body is built to last and rigorously tested to withstand real-life washroom conditions.
Additional features
-
A power mode to suit your washroom
Switch between two power modes. Max mode for busy areas of high footfall or Eco mode for energy-efficiency and acoustic control.
Fast hand drying in 10 seconds6
Our powerful digital motor spins at 75,000 rpm to shift 23 litres of air per second, for a 10 second dry time in Max mode.
Less waste
Up to 87% less expensive to run than other hand dryers. Up to 99% less than single-use paper towels, with up to 85% less CO2.7 Creating a better environment in your washrooms and in the world outside.
Accreditations
-
Carbon Trust
All Dyson Airblade™ hand dryers are certified by the Carbon Trust.
HACCP
The only hand dryer certified for use in food preparation environments, by the HACCP International standards.
NSF
The only hand dryer certified by the NSF International Protocol P335.
Specifications
-
Dry time (Eco)
12 seconds
Motor power (Eco)
650w
Sound power level (Eco)
77dBADry Time (Max)
10 seconds
Motor Power (Max)
900w
Sound power level (Max)
79dBAWeight
4.5kg
Stainless steel grade
304L
IP rating
IP24Height
500mm
Length
100mm
Width
450mm
Useful documents
-
Frequently asked questions
The power mode can be set at installation of the product to either Max or Eco mode. Max mode operates at 900W and delivers a 10 second dry time, perfect for high footfall environments. Eco mode, operating at 650W, delivers a 12 second dry time but uses only 9.1kJ of energy per dry and is better suited for locations such as offices. The power mode can be altered following install but would need removal from the wall to do so as the switch is not accessible externally.
To ensure the machine performs to its best and remains hygienic, the Dyson Airblade 9kJ hand dryer should be cleaned daily. Please refer to the cleaning guide for further information (see above).
Splashbacks are recommended for use on plasterboard and cavity walls. They can also be used when replacing other Dyson Airblade™ hand dryers.
-
Get in touch
Explore the Dyson Airblade™ hand dryer range
Why choose Dyson for business
1 Dry time determined using Dyson test method 769 based on NSF P335 to a measurement of 0.1g residual moisture.
2 HEPA filter tested to EN1822-5, by an independent testing laboratory, under prescribed test conditions.
3 Average electricity price US$0.1/kWh as of July 2021. For calculations visit www.dyson.co.id/for-business/overview/calculations
4 Tested by an independent laboratory, under prescribed test conditions, using the bacteria Brevundimonas diminuta and the virus MS-2 coliphage.
5 Average loudness (measured in sones) compared to Dyson Airblade™ hand dryers.
6 Measured in Max mode.
7 Dry time and energy consumption calculated for Max mode. Dry time was determined using Dyson test method 769 based on NSF P335 to a measurement of 0.1g residual moisture.
8 The environmental impact of electrical appliances and paper towels was measured by Carbon Trust. The calculations were produced using the software Footprint Expert Pro, based on product use over 5 years and using weighted averages of individual countries of use. Dry times for product were evaluated using DTM 769. Average electricity price US$0.1/kWh as of July 2021. For calculations visit www.dyson.co.id/for-business/overview/calculations
