Dyson WashG1™ wet cleaner is Dyson’s first dedicated wet floor cleaner for hard floors, picking up both wet and dry debris.

Dyson WashG1™ wet cleaner has counter-rotating motorised rollers – instead of vacuum suction – to separate large debris from liquids. Vacuum motors may also expel air back into the room which could cause odours.

Dyson WashG1™ wet cleaner has 3 modes (levels 1, 2 and 3), plus a MAX setting. Levels 1 and 2 are for dry dust, hair and fibre and low viscosity spillages. Level 3 is for dry debris and high viscosity spillages. MAX setting is for stubborn dirt. You can switch between modes using the blue button.

No. Vacuuming is not necessary, as Dyson WashG1™ wet cleaner picks up and separates both wet and dry debris, and hair.

However, we recommend vacuuming first if there’s a large amount of debris, long hair or pet hair on the floor to ensure optimal performance.

Dyson WashG1™ wet cleaner is Dyson’s first dedicated wet floor cleaner for hard floors, picking up both wet and dry debris. You will need a vacuum cleaner for your carpets, upholstery, mattresses, pet beds, countertops, and inside your car.

It can clean everything from fine dust, small debris and hair, to splashes and spillages, all the way to heavier spillages such as ketchup, syrup and oil mist – even stubborn stains such as dried food and toothpaste.

The Clean water tank has a 1 litre capacity whilst the Dirty water tank has a 0.8 litre capacity.

Up to 290sqm, based on Dyson internal calculation with no repeated cleaning on the same area, with 0.5m/s speed. Actual area coverage may vary depending on habits and floor types.

The Dyson WashG1™ doesn’t need to be cleaned manually after every clean. Instead, we recommend using the Self-clean function after each use. We also recommend cleaning the Dyson WashG1™ manually after every three uses.

When cleaning large amounts of debris or longer hair, we recommend emptying the debris tray after each use to maintain optimal performance.

Place the machine on the dock after each clean, to store and charge, ready for next time.

The Dyson WashG1™ wet cleaner is our first dedicated wet floor cleaner, engineered to wash hard floors. The Dyson V12s Detect Slim Submarine™ are Dyson’s multifunctional vacuum cleaners, which include a precision-engineered wet roller head, dust illumination and anti-tangle technologies.

Turn the machine on and off via the red power button underneath the UI screen.

No, Dyson WashG1™ wet cleaner is Dyson’s first dedicated wet floor cleaner for hard floors, picking up both wet and dry debris.

Apart from the charging dock, the Dyson WashG1™ wet cleaner has everything you need onboard. No additional accessories.

No, this machine is engineered for hard floors only.

When using floor cleaning solutions, do use gentle, low-foaming common household detergents and do not use bleach. Be sure to follow the solution’s specific direction for dilution - with a 1L clean water tank you shouldn't require any more than 1Tbsp of solution. We also recommend adding the solution after filling the clean water tank.